Professional Carpet, Floor, and Rug Cleaning in Cincinnati

Our certified technicians performed a thorough inspection of the lower wall cavity and adjacent flooring at the base of the stairs. We conducted selective drywall investigation behind the baseboard, confirmed localized mold growth within the wall cavity, HEPA-vacuumed affected structural materials, applied an EPA-registered antimicrobial treatment to eliminate surface spores, and recommended targeted drying and drywall restoration to prevent recurrence.

Our restoration team conducted a final post-mitigation inspection to prepare for structural reinstallation. We evaluated exposed concrete subflooring and vinyl floor transitions at door jambs, inspected built-in cabinetry and vanity bases for complete drying, detached temporary power runs, and drafted a scope of work for new flooring installation, baseboard trim re-installation, and full content resetting.

Our emergency mitigation team arrived on site and performed a comprehensive moisture inspection using Protimeter moisture meters and thermal cameras. We tracked the water intrusion path behind the bathroom vanity light fixture, evaluated water staining along the ceiling-wall junction, tested carpet saturation levels in adjacent hallway areas, and set up targeted drying equipment to prevent secondary damage and microbial growth.

Our certified technicians conducted an initial site assessment of the exterior crawl space entry hatch and subfloor framing. We inspected the deteriorated, water-damaged wooden hatch decking abutting the exterior brick foundation, evaluated the interior crawl space floor joists and cinder block walls for moisture accumulation and organic growth, applied an EPA-registered antimicrobial treatment to sanitize the subfloor timber, and recommended replacing the rotted hatch board with a sealed, weather-resistant cover to prevent ongoing water intrusion.

We performed comprehensive moisture checks on the surrounding wall and ceiling surfaces, confirming all areas were completely dry. To prevent future condensation build-up and improve system airflow, we provided a quote for full air duct and tumble dryer vent cleaning (£625.21 / $625.21), which the customer approved and scheduled for service.

We carried out an inspection within the attic space to locate the source of water intrusion. Inspecting the roof decking around the vent stack revealed visible water staining and moisture migration along the underside of the timber sheathing. We performed moisture meter testing on the structural framing and adjacent insulation to evaluate saturation levels and determine the extent of required drying and remediation.

We conducted a site inspection to establish moisture boundaries and initiate structural drying protocols. We executed flood-cut removal of saturated plasterboard along perimeter wall bases to expose wall cavities and studs, inspected surrounding tiled doorways and baseboards for water migration, and set up commercial drying equipment to thoroughly dehydrate the concrete slab and timber framing.

We performed deep water extraction across the affected carpet using weighted sub-floor extraction equipment (Water Claw) attached to vacuum extraction lines. Additionally, we inspected the baseboard heating channels, skirting areas, and walls for trapped moisture to ensure thorough structural drying and mitigation.

We performed a detailed exterior inspection of the building's envelope. Our assessment documented loose soffit panels and damaged gutter junctions along the roofline, misaligned corner trim and exterior utility wire attachments, and upper-gable siding alignment to prepare a comprehensive repair plan.

We provided emergency flood mitigation and heavy debris removal services. Our technicians initiated a comprehensive content pack-out process, carefully extracting contaminated furniture and salvageable items from the basement to the exterior for assessment and disposal. Inside the property, we cleared the saturated cardboard, heavy mud, and silt deposits to prepare the concrete foundation for professional sanitization and structural drying.

We utilized professional digital moisture meters to accurately map the water migration path from the compromised ceiling down through the wall cavities. After determining the full extent of the saturation, we initiated comprehensive water damage mitigation and targeted mold remediation protocols to safely treat the contaminated surfaces, eradicate the black mold, and thoroughly dry the affected structure to prevent further deterioration.

We provided comprehensive mold remediation and indoor air quality control services. To protect the property during the mitigation process, our technicians laid down heavy-duty floor protection paper along the hardwood hallway and covered the adjacent dining room furniture with protective plastic. We then deployed commercial air scrubbers and HEPA vacuum systems to capture airborne mold spores while safely removing the contaminated wall insulation and treating the exposed structural cavities.